Airsoft 40mm Launcher, RB40 Replacement Reinforced Trigger, Sizable Designs

Replacement Trigger for the Sizable Designs RB40 airsoft launcher.

*You will receive 1 replacement trigger*

The triggers of this launcher are reinforced with a 3mm steel rod and printed in a higher impact-rated filament. But I still consider the triggers a "consumable" part, especially if you are using CO2 or Taginn shells. Due to the fact that they have a rather unpredictable amount of back recoil on the firing pin. During my testing, the reinforced triggers survived 160 impacts from a framing hammer before failure.

They will require some fitting to ensure accurate firing pin placement. I will have a video explaining the process, which should take less than 10 minutes. You will likely need to sand down the "adjust pad" of the replacement trigger until the firing pin sits flush with the receiver. This will ensure maximum firing pin travel length.